From b7bde6942c2db1c213c09fd0bcf85d44c27afe0d Mon Sep 17 00:00:00 2001
From: Stefano Stabellini
Date: Mon, 21 Oct 2019 15:32:21 -0700
Subject: Rename docker-extras to scripts

Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
---
 docker-extras/disk_image | 134 -----------------------------------------------
 1 file changed, 134 deletions(-)
 delete mode 100755 docker-extras/disk_image

(limited to 'docker-extras/disk_image')

diff --git a/docker-extras/disk_image b/docker-extras/disk_image
deleted file mode 100755
index 57b933f..0000000
--- a/docker-extras/disk_image
+++ /dev/null
@@ -1,134 +0,0 @@
-#!/bin/bash
-
-# This helps to see what is going on
-set -e -x
-
-# Used to maintain intermediary state. (Not currently used)
-DESTDIR="$(mktemp -d /tmp/imagebuilder-zynqmp.XXXXXX)"
-UBOOT_OUT="/tmp/output"
-OUTDIR="/tmp/img"
-mkdir ${OUTDIR}
-
-IMG="${OUTDIR}/zynqmp.img"
-
-. config
-
-offset=$((2*1024*1024))
-_part1_size=`stat --printf="%s" $UBOOT_OUT/$XEN`
-_part1_size=$(( $_part1_size + `stat --printf="%s" $UBOOT_OUT/$DOM0_KERNEL` ))
-_part1_size=$(( $_part1_size + `stat --printf="%s" $UBOOT_OUT/$DEVICE_TREE` ))
-i=0
-while test $i -lt $NUM_DOMUS
-do
-	_part1_size=$(( $_part1_size + `stat --printf="%s" $UBOOT_OUT/${DOMU_KERNEL[$i]}` ))
-	if test "${DOMU_RAMDISK[$i]}"
-	then
-		_part1_size=$(( $_part1_size + `stat --printf="%s" $UBOOT_OUT/${DOMU_RAMDISK[$i]}` ))
-	fi
-	if test "${DOMU_PASSTHROUGH_DTB[$i]}"
-	then
-		_part1_size=$(( $_part1_size + `stat --printf="%s" $UBOOT_OUT/${DOMU_PASSTHROUGH_DTB[$i]}` ))
-	fi
-	i=$(( $i + 1 ))
-done
-
-# add 16 MB slack
-_part1_size=$(( $_part1_size + 16777216 ))
-_part1_size=$(( $_part1_size + $offset - 1))
-_part1_size=$(( $_part1_size & ~($offset - 1) ))
-_part1_size=$(( $_part1_size / 1024 / 1024 ))
-echo PART1 size: "$_part1_size"MB
-
-if test "$DOM0_RAMDISK"
-then
-	_part2_size=`stat --printf="%s" $UBOOT_OUT/$DOM0_RAMDISK`
-fi
-_part2_size=$(( $_part2_size + $offset - 1))
-_part2_size=$(( $_part2_size & ~($offset - 1) ))
-# account for gzip compression
-_part2_size=$(( $_part2_size * 2 ))
-# add some slack
-_part2_size=$(( 128*1024*1024 + $_part2_size ))
-_part2_size=$(( $_part2_size / 1024 / 1024 ))
-echo PART2 size: "$_part2_size"MB
-
-
-_sector_size=512
-# _sector_first_start needs to be aligned to 2048
-_sector_first_start=2048
-_sector_first_end=$(( $_part1_size * 1024 * 1024 / $_sector_size + $_sector_first_start - 1))
-_sector_second_start=$(( $_sector_first_end + 1 ))
-_sector_second_end=$(( $_part2_size * 1024 * 1024 / $_sector_size + $_sector_second_start - 1))
-_tot_size=$(( $_part1_size + $_part2_size + 16 ))
-
-# NOTE: Increase vos_a to 256 to accomodate rootfs
-# 528 MiB (256 + 256 + 16)
-truncate $IMG -s "$_tot_size"M
-
-# create GPT partition table
-sgdisk -og $IMG
-
-sgdisk -n 1:$_sector_first_start:$_sector_first_end -c 1:"Linux1" -t 1:8300 $IMG
-sgdisk -n 2:$_sector_second_start:$_sector_second_end -c 2:"Linux2" -t 2:8300 $IMG
-
-# find the first available loop device
-_loop_dev=$(losetup -f)
-
-# attach loopback device to $IMG
-losetup $_loop_dev $IMG
-
-_disksize=$(blockdev --getsize $_loop_dev)
-
-dmsetup create diskimage --table "0 $_disksize linear $_loop_dev 0"
-
-# ensure that /dev/mapper/diskimage exists
-while [ ! -b /dev/mapper/diskimage ]
-do                      
-	sleep 2
-done
-
-kpartx -a /dev/mapper/diskimage
-
-# ensure that /dev/mapper/{diskimage1,diskimage2} exists
-while [ ! -b /dev/mapper/diskimage1 ] || [ ! -b /dev/mapper/diskimage2 ]
-do
-	sleep 2
-done
-
-# format vos_a partition
-mkfs.ext4 -L vos_a -F /dev/mapper/diskimage1
-
-# format vos_b partition
-mkfs.ext4 -L vos_b -F /dev/mapper/diskimage2
-
-
-# create mount point and mount disk2
-mkdir -p ${DESTDIR}/part/disk2
-mount -t ext4 /dev/mapper/diskimage2 $DESTDIR/part/disk2
-
-# Extract rootfs cpio archive into `.../part/vos_a`
-cd ${DESTDIR}/part/disk2
-cat ${UBOOT_OUT}/dom0-ramdisk.cpio | gunzip | cpio -id
-mv ${UBOOT_OUT}/dom0-ramdisk.cpio* /tmp
-
-# umount
-sync
-cd /
-umount $DESTDIR/part/disk2
-
-# create mount point and mount disk1
-mkdir -p ${DESTDIR}/part/disk1
-mount -t ext4 /dev/mapper/diskimage1 $DESTDIR/part/disk1
-
-# copy over files needed
-cp -r $UBOOT_OUT/* ${DESTDIR}/part/disk1/
-
-# unmount
-sync
-# This fails for some reason. It could work now because we are not using qemu-user
-# fstrim $DESTDIR/part/disk1
-umount $DESTDIR/part/disk1
-
-kpartx -d /dev/mapper/diskimage
-dmsetup remove diskimage
-losetup -d $_loop_dev
-- 
cgit v1.2.3